fbpx
LINE


ชุดหูฟัง SHURE P3TER112GR-Q12 ชุดหูฟังมอนิเตอร์ไร้สาย Wireless Personal Monitor System

คลิ๊กที่ภาพเพื่อขยาย
ยี่ห้อ : Shure
รุ่น :  Shure P3TER112GR ไวเรส
การจัดส่ง : ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ / จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล

ราคา : 28,900 บาท

47,200 บาท ประหยัด39%
คูปองสมาชิก :  - ฿250  
การชำระเงิน : ผ่อนไม่ใช้บัตรเครดิต / จ่ายหน้าร้าน 6สาขา / โอนเงิน / เก็บปลายทาง / บัตรเครดิต /ผ่อนชำระ 0% (บางรายการ) / Shopee / Lazada

สั่งซื้อ ชุดหูฟัง SHURE P3TER112GR-Q12 ชุดหูฟังมอนิเตอร์ไร้สาย Wireless Personal Monitor Systemผ่านline สั่งซื้อ ชุดหูฟัง SHURE P3TER112GR-Q12 ชุดหูฟังมอนิเตอร์ไร้สาย Wireless Personal Monitor Systemผ่าน messenger

Description

SHURE P3TER112GR-Q12 Wireless Personal Monitor System Wireless Monitor Headset Frequency 748-758 MHz Original Free Shipping !! From the brand SHURE

P3TR112GR Wireless Personal Monitor System Set include: P3R Wireless Bodypack Receiver & P3T PSM®300 Wireless Transmitter & SE112 Sound Isolating Earphones

The PSM®300 Stereo Personal Monitor System delivers detailed 24-bit digital audio
and reliable wireless freedom to every corner of the stage. Patented Audio Reference
Companding ensures the clearest sound, with ultra-low noise and no artifacts. Dependable
wireless coverage extends over 300 ft (90 m) of range and eliminates dropouts. Easy to setup
and operate, PSM300 systems offer one-touch frequency scan and sync to find and assign a
clean wireless channel. Adjust the volume using MixMode® technology or stereo mode to create
a personal mix from two channels of audio.
System Features
• Send two channels of audio wirelessly to performers onstage
• 24-bit digital audio provides clear, detailed sound
• Patented Audio Reference Companding sounds more like wired
• Up to 90 dB signal-to-noise ratio
• Exceptionally wide stereo separation
• Solid analog RF connection over a 300 ft (90 m) range
• Create a personal mix from the bodypack with MixMode® technology or stereo mode
• Frequency scan and IR sync quickly finds and assigns a clean channel
• Half-rack, single channel transmitter with included rack mount kit
• P3R bodypack systems available with SE112 Sound Isolating™ Earphones
• P3RA professional bodypack systems available with SE215 Sound Isolating™ Earphones

Specification

PSM®300 System Specifications
RF Carrier Range 488–937.5 MHz
(Varies by region, see frequency range and output power table)
Compatible Frequencies
Per band
up to 15
Tuning Bandwidth 24 MHz maximum (Note: varies by region)
Operating Range
Environment dependent
90 m (300 ft)
Audio Frequency Response 38 Hz–15 kHz
Signal-to-Noise Ratio
A-weighted
90 dB (typical)
Total Harmonic Distortion
ref. ±34 kHz deviation @1 kHz
<0.5% (typical)
Companding Patented Shure Audio Reference Companding
Spurious Rejection
ref. 12 dB SINAD
>80 dB (typical)
Frequency Stability ±2.5 ppm
MPX Pilot Tone 19 kHz (±1 Hz)
Modulation FM*, MPX Stereo
(ref. ±34 kHz deviation @ 1 kHz)
Operating Temperature -18 °C (0 °F) to +63 °C (145 °F)
Frequency Range
Band Range (MHz)
Transmitter
Output (mW)
G20 488–512 30
H8E 518–542 10
H20 518–542 30
J10 584–608 30
J13 566–590 30
JB 806–810 10
K12 614–638 30
K3E 606–630 30
L18 630–654 10
L19 630–654 30
M16 686–710 30
M18 686–710 10
Q25 742–766 30
R12 794–806 10
S8 823–832 20
T11 863–865 10
X7 925–937.5 10
Optional Accessories and Replacement Parts
Bodypack receiver P3R
Half-rack Transmitter P3T
Universal bodypack receiver P3RA
Antenna and power distribution system PA411
Wired PSM bodypack P9HW
Dynamic MicroDriver earphones SE112
Dynamic MicroDriver earphones SE215
High-definition MicroDriver earphones with tuned bass port SE315
High-definition earphones with dual MicroDrivers SE425
High-definition earphones with triple MicroDrivers SE535
High-definition earphones with quad MicroDrivers SE846
Carrying/Storage Bag 95A2313
1/4 wave antenna (774–952 MHz) UA400
1/4 wave antenna (470–752 MHz) UA400B

Component Specifications
P3T Wireless Transmitter
Dependable wireless transmission and 24-bit digital audio deliver a superior personal monitoring mix for every performance. Send 2 channels of audio to a
bodypack receiver up to 300 feet away, with patented Audio Reference Companding to ensure transparent sound quality with no artifacts or dropouts. The
rugged, half rack transmitter features easy front-panel controls including one-touch sync and input level knob to enable quick setup and easy operation.
Rear-panel balanced inputs and loop outputs provide versatile connectivity to audio sources and other P3T units.
• Single channel, half-rack transmitter with included rack mount kit
• Sends a stereo or mono mix wirelessly to performers onstage
• Rock-solid wireless connection to P3R receiver over 300 ft (90 m) range
• One-touch IR sync instantly links transmitter to receiver
• Up to 30 mW output power (region dependent)
• 24 MHz tuning range (region dependent)
• ¼” (6.3 mm) TRS balanced inputs and loop outputs
• High-contrast LCD menu with detailed L/R audio output meters
• Detachable antenna
• External power supply
• Selectable line/aux level
Overview
Product Specifications
P3T Front Panel
P3T Back Panel
RF Output Power 10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ω (typical)
Net Weight 783 g (27.6oz.)
Dimensions 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.), H × W × D
Power Requirements 12–15 V DC, 260 mA maximum
Audio Input
Connector Type 6.35 mm (1/4″) TRS
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kΩ (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 V DC
Audio Output
Connector Types 6.35 mm (1/4″) TRS
Configuration Electronically balanced
Impedance Connected directly to inputs

Component Specifications
P3R Wireless Bodypack Receiver
The P3R is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System. With 24-bit digital audio clarity
and up to 300 ft of range (90 m), the P3R offers reliable wireless freedom that covers every corner of the stage. Simply connect
a set of earphones and adjust the controls to create a wireless personal mix. Patented Audio Reference Companding ensures the
clearest sound, with ultra-low noise and no artifacts. Use MixMode® technology to customize the mono blend from two channels of
audio, or select stereo mode and adjust the left/right balance as desired. One-touch frequency scan and automatic frequency selection enables quick setup and connection to a P3T transmitter via IR sync.
• Slim, lightweight, durable form factor
• Frequency scan and IR sync quickly finds and assigns a clean channel
• MixMode® technology enables adjustment of two independent monitoring mix levels
• Stereo mode enables adjustment of left/right balance
• Easy to adjust volume knob and mix control
• 2 AA batteries provide up to 6 hours of continuous operation
• Power save mode preserves battery life when earphones are not connected
• Power and battery status LED
Overview
Specifications
Active RF Sensitivity
(at 20 dB SINAD)
2.2 μV
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω
80 mW (per output)
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8″) stereo
Net Weight 98 g (3.5 oz.)
(without batteries)
Dimension 110 × 64 × 21 mm H × W × D
Battery Life
(continuous use)
5–7 hours, AA batteries

Component Specifications
P3RA Professional Wireless Bodypack Receiver
P3RA Professional Bodypack
Receiver
The P3RA is a wireless stereo bodypack receiver for use with the PSM®300 Personal Monitor System.
With detailed 24-bit digital audio and reliable wireless performance, the P3RA bodypack delivers professional personal monitoring to
any corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.
Find a wireless channel easily, using the scan function to automatically select the cleanest frequency available from a wide tuning
bandwidth. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.
EQ and volume limiting further individualize the sound via the high-contrast LCD menu. With a compact and rugged aluminum body,
the P3RA ensures a long lifetime of use and easily clips onto a belt or guitar strap. Two standard AA batteries provide up to 6 hours
of continuous use. The optional SB900A rechargeable battery (sold separately) extends runtime and allows easy in-unit charging.
• Rugged, all-metal construction
• High-contrast LCD screen with menu-based navigation
• 2-band shelving EQ with high and low boost
• Volume limiter sets the maximum gain level range for the volume knob
• MixMode® technology enables adjustment of two independent monitoring mix levels
• Stereo mode enables adjustment of left/right balance
• Frequency scan and IR sync quickly finds and assigns a clean channel
• 2 AA batteries provide up to 6 hours of continuous use
• Optional Shure SB900A lithium-ion rechargeable battery provides extended runtime
• Power and battery status LED
• 5-segment battery life meter
• Power save mode preserves battery life when earphones are not connected
Overview
Specifications
Rechargeable Power Management (sold separately)
SB900A Rechargeable Battery
PSM 300 receivers are compatible with the SB900A lithium-ion rechargeable
battery, which provides up to 7 hours of continuous use and precise tracking of
remaining life and charge cycle details.
SBC200 Dual Docking Recharging Station
This compact and portable unit charges batteries while in transmitters or out.
Up to 4 SBC200’s can be chained together to run off one power supply.
SBC800 Eight Battery Recharging Station
This compact and portable unit charges up to 8 SB900A batteries to full capacity within 3 hours, with status LEDs to indicate power levels. SB900A batteries
fit securely in the charger for easy, efficient storage and transport.
Active RF Sensitivity
(at 20 dB SINAD)
2.2 μV
Image Rejection >90 dB
Adjacent Channel Rejection >60 dB
Intermodulation Attenuation >50 dB
Blocking >60 dB
Audio Output Power
1 kHz @ <1% distortion, peak power, @32 Ω
80 mW (per output)
Minimum Load Impedance 16 Ω
Headphone output 3.5 mm (1.8″) stereo
Net Weight 196 g (6.9 oz.)
(with batteries)
Dimensions 99 × 66 × 23 mm (H × W × D)
Battery Life
(continuous use)
4–5.5 hours, AA batteries
5.5–7 hours, SB900A battery

×