LINE


Darkglass Microtubes X 900-900 watt Bass Head เอฟเฟค

คลิ๊กที่ภาพเพื่อขยาย
ยี่ห้อ : Darkglass

ราคา : 44,900 บาท

รุ่น :  Darkglass Microtubes X 900-900 watt Bass Head
💳 ช่องทางการชำระเงิน
จ่ายหน้าร้าน 13 สาขา โอนเงิน เก็บปลายทาง บัตรเครดิต ผ่อน 0% (บางรายการ) Shopee Lazada

🏢
ลูกค้าองค์กร / ขอใบเสนอราคา
สั่งซื้อ Darkglass Microtubes X 900-900 watt Bass Head เอฟเฟคผ่านline สั่งซื้อ Darkglass Microtubes X 900-900 watt Bass Head เอฟเฟคผ่าน messenger

Description

Uncompromised precision.
Designed after the revered X series pedals, the Microtubes X 900 sets a new standard for accuracy and control. We packed an all-analog preamp, a 900 watt Class D amplifier, and an ultra-quiet 6-band graphic equalizer inside to sculpt tones from crystal clear to aggressive and overdriven.

Specification

Front Panel Features

Input
Use this jack to connect your instrument via a standard ¼” mono cable.

Passive/Active
Use this push-button switch to change from passive to active mode. If your bass is active, it can have a hotter signal, making the amp distort earlier (feel free to use if such additional distortion is desired).

X
Use this push-button to turn on or off the Microtubes X Engine, which allows you to compress and distort your bass signal in two separate bands, solidifying the clean low end and distorting the highs to taste—from articulate to aggressive. The Microtubes X Engine operates before the EQ section.

Clean Comp
Use this push-button switch to activate the compressor circuit for the clean channel.

Vol (Clean Comp)
Sets the level of the clean channel when the compressor is engaged.

HPF (High Pass Filter)
Controls the cutoff frequency of the high pass filter, applied before the clean signal is fed to the distortion circuit. Ranging from 100 Hz (for thicker, fuzzier saturation) to 1 kHz (for ultra-sharp definition).

Drive
Sets the amount of distortion for the high pass side.

Mix
Controls the blend between the compressed lows and the distorted highs.

LPF (Low Pass Filter)
Controls the cut-off frequency of the low pass filter, applied before the clean signal is fed to the compression circuit. Ranging from 50 Hz (for only sub-bass) to 500 Hz (to preserve some clean mids).

Comp
Controls the amount of compression for the low band when X is activated. Both threshold and makeup gain are controlled to maintain a constant level. This control also adjusts compression when the compressor is enabled for the clean signal. The clean comp is full-range.

Level
Sets the output volume of the X channel.

Bass
±12 dB @ 80 Hz

Mids
±12 dB at 250, 500, 1.5k, and 3 kHz

Treble
±12 dB @ 3 kHz

Master
Sets the overall volume of the unit.

Mute
Use this push-button to mute the amplifier.

Dimensions

  • Width: 26.7 cm / 10¼”

  • Length: 25.5 cm / 10”

  • Height: 7.1 cm / 2¾”

  • Weight: 2.4 kg / 5.3 lb

Review

ข้อมูลสินค้า

ความแม่นยำไร้ข้อจำกัด
ได้รับการออกแบบตามแรงบันดาลใจจากซีรีส์ X อันเป็นที่เคารพ Microtubes X 900 ยกระดับมาตรฐานใหม่ของความแม่นยำและการควบคุม ภายในบรรจุพรีแอมป์แบบแอนะล็อกทั้งหมด, แอมป์คลาส D กำลังขับ 900 วัตต์ และอีควอไลเซอร์กราฟิก 6 แบนด์ที่เงียบเป็นพิเศษ เพื่อปรับโทนเสียงได้ตั้งแต่ใสคมชัดไปจนถึงดุดันและโอเวอร์ไดรฟ์

รายละเอียดคุณสมบัติ

คุณสมบัติด้านหน้า (Front Panel Features)

Input (แจ็คอินพุต)

  • ใช้เชื่อมต่อเครื่องดนตรีของคุณด้วยสายมอนโอมาตรฐาน ¼”

Passive/Active (ปุ่มสลับพาสซีฟ/แอคทีฟ)

  • ปุ่มกดเพื่อเปลี่ยนระหว่างโหมดพาสซีฟและแอคทีฟ

  • โหมดแอคทีฟให้สัญญาณแรงขึ้น ทำให้แอมป์แตกเร็วยิ่งขึ้น (ใช้ได้ถ้าต้องการความแตกเพิ่ม)

X (Microtubes X Engine)

  • ปุ่มเปิด/ปิด Microtubes X Engine

  • บีบอัดและแตกสัญญาณเบสในสองย่านความถี่ แยกแหลมและเบส ทำให้เบสชัดเจนและแหลมแตกตั้งแต่ชัดเจนจนถึงดุดัน

  • X Engine ทำงานก่อนส่วน EQ

Clean Comp (คอมเพรสเซอร์ช่องคลีน)

  • ปุ่มกดเพื่อเปิดวงจรคอมเพรสเซอร์สำหรับช่องคลีน

Vol (Clean Comp) (ระดับเสียงช่องคลีน)

  • ปรับระดับเสียงช่องคลีนเมื่อคอมเพรสเซอร์ทำงาน

HPF (High Pass Filter, ตัวกรองความถี่สูง)

  • ปรับความถี่ตัดของ HPF ก่อนส่งสัญญาณไปยังวงจรแตก

  • ช่วง: 100 Hz (ทำให้เบสหนาและฟัซซี่) – 1 kHz (ชัดเจนมาก)

Drive (ระดับความแตก)

  • ปรับความแตกของสัญญาณย่าน HPF

Mix (ผสมสัญญาณ)

  • ปรับการผสมระหว่างเบสถูกคอมเพรสและแหลมแตก

LPF (Low Pass Filter, ตัวกรองความถี่ต่ำ)

  • ปรับความถี่ตัดของ LPF ก่อนส่งสัญญาณไปคอมเพรส

  • ช่วง: 50 Hz (เฉพาะซับเบส) – 500 Hz (เก็บย่านกลางบางส่วน)

Comp (คอมเพรสเซอร์)

  • ปรับการบีบอัดของย่านต่ำเมื่อ X เปิด

  • ใช้ควบคุมคอมเพรสช่องคลีนเมื่อเปิด Clean Comp

  • คอมเพรสเต็มย่านความถี่

Level (ระดับเอาต์พุต X)

  • ปรับระดับเสียงของช่อง X

Bass (เบส)

  • ±12 dB @ 80 Hz

Mids (กลาง)

  • ±12 dB ที่ 250, 500, 1.5k และ 3 kHz

Treble (แหลม)

  • ±12 dB @ 3 kHz

Master (มาสเตอร์)

  • ปรับระดับเสียงรวมของเครื่อง

Mute (ปิดเสียง)

  • ปุ่มกดปิดเสียงแอมป์


ขนาด (Dimensions)

  • กว้าง: 26.7 ซม. / 10¼”

  • ยาว: 25.5 ซม. / 10”

  • สูง: 7.1 ซม. / 2¾”

  • น้ำหนัก: 2.4 กก. / 5.3 ปอนด์

Music Arms