Darkglass Microtubes X7 เอฟเฟคเบส

ราคา : 12,900 บาท
✅ ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ
🚀 จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล
วีดีโอ

Description
Darkglass Microtubes X7: Studio-Grade Crossover Distortion for the Perfect Bass Tone
The **Darkglass Microtubes X7** series brings the proven studio technique of Crossover Distortion directly to your pedalboard, enabling you to cover the entire bass distortion spectrum. This method, long utilized by top producers, allows precise control from articulate high gain and punchy mild overdrive to raw, gnarly fuzz and everything in between. With the Microtubes X7, you gain absolute mastery over constructing your perfect bass distortion texture, definition, and size, ensuring your low end remains tight and clear while the high frequencies scream with clarity.

Key Features and Distortion Control
- High Pass Frequency (100Hz – 1kHz): Controls the crossover cutoff frequency for the distortion side, ranging from 100Hz (for thicker, fuzzier saturation) to 1kHz (for ultra-sharp definition).
- Low Pass Frequency (50Hz – 500Hz) with Low Comp: Controls the cutoff frequency of the clean signal mixed back, ranging from 50Hz (sub-bass only) up to 500Hz to preserve clean mids, complemented by a dedicated compression control for the low-pass signal.
- High Drive & High Level: Independent controls for setting the distortion amount and output volume of the high-pass signal.
- 4-Band Active EQ: Precise tone shaping with Low Shelf (±12dB @ 80 Hz), 500 HZ (±12dB), 1 KHZ (±12dB), and High Shelf (±12dB @ 5 kHz).
- Direct Output (XLR) with Ground Lift: Features a balanced Direct Output for running into PA systems or studio consoles, with a Ground Lift switch to eliminate ground noise in the DI signal.
- Compact and Robust Design: Dimensions of Width: 94 mm / 3¾″, Length: 120 mm/ 4¾″, and Weight: 320 g / 0.7 lb for easy integration into any pedalboard.
The Definitive Bass Distortion Tool
The Darkglass Microtubes X7 provides unprecedented control by distilling complex studio techniques into a compact stompbox. By allowing players to keep the low end clean and compressed while applying distortion only to the higher frequencies, the X7 ensures that the bass tone remains massive, articulate, and defined in any mix. Whether you are dialling in a subtle overdrive or a ferocious wall of fuzz, the X7 is an indispensable tool for the modern bassist. For professional-grade distortion textures that maintain punch and clarity, the Microtubes X7 is the pedal that delivers.
Specification
Darkglass Microtubes X7: Technical Specifications and Controls |
|
|---|---|
| Distortion Control (High Pass Freq) | Controls the cutoff frequency to be distorted (100Hz for fuzz/thick, 1kHz for ultra-sharp definition) |
| Clean Blend Control (Low Pass Freq) | Controls the clean frequency mixed back (50Hz sub-bass only, 500Hz preserves clean mids) |
| Low Comp | Sets the amount of compression for the low-pass signal |
| Low Level / Master | Sets the overall volume of the unit |
| High Drive / High Level | Sets the amount of Distortion and Output volume for the high-pass signal |
| EQ Section (Low Shelf) | ±12dB @ 80 Hz |
| EQ Section (500 HZ / 1 KHZ) | ±12dB at 500 Hz and 1 kHz |
| EQ Section (High Shelf) | ±12dB @ 5 kHz |
| Inputs and Outputs | Input (¼” mono), Output (¼”), Direct Output (Balanced XLR), Parallel Output (Passthrough) |
| Ground Lift | Control to lift the ground of the XLR output to eliminate noise |
| Dimensions (W x L x H) | 94 mm x 120 mm x 46 mm (3¾″ x 4¾″ x 1¾″) |
| Weight | 320 g (0.7 lb) |
| Power Requirement | 9V DC, 100mA current draw, Center-Negative plug |
ข้อมูลสินค้า
Darkglass Microtubes X7: สร้างสรรค์เสียงแตกเบสที่สมบูรณ์แบบด้วยเทคนิค Crossover Distortion ระดับสตูดิโอ
**Darkglass Microtubes X7** นำเสนอวิธีการสร้างเสียงแตกสำหรับเบสที่เหล่าโปรดิวเซอร์มืออาชีพใช้ในสตูดิโอมานานหลายปี ด้วยเทคนิคการแยกความถี่เสียง (Crossover Distortion) ที่ให้คุณสามารถควบคุมสเปกตรัมของเสียง Distortion ได้อย่างสมบูรณ์แบบ ตั้งแต่เสียงแตกที่หนักแน่นและชัดเจน ไปจนถึงเสียง Overdrive ที่นุ่มนวลมีแรงปะทะ หรือแม้แต่ Fuzz ที่ดิบและดุดัน ด้วย Microtubes X7 คุณจะสามารถกำหนดทิศทางของโทนเสียงเบส, ความคมชัด, และขนาดของเสียงแตกได้อย่างแม่นยำ เพื่อสร้างสรรค์เสียงเบสในอุดมคติของคุณ

คุณสมบัติเด่นและการควบคุมเสียง
- High Pass Frequency (100Hz – 1kHz): ควบคุมความถี่ที่ต้องการให้เกิดเสียงแตก ตั้งแต่ 100Hz สำหรับ Saturation ที่หนาและนุ่ม ไปจนถึง 1kHz สำหรับความคมชัดที่เฉียบขาด
- Low Pass Frequency (50Hz – 500Hz) พร้อม Low Comp: ควบคุมความถี่ต่ำที่ต้องการผสมกลับเข้ามา ตั้งแต่ 50Hz (Sub-Bass เท่านั้น) ถึง 500Hz เพื่อคงเสียงกลางที่สะอาดบางส่วน พร้อมตั้งค่าระดับ Compression สำหรับเสียงความถี่ต่ำ
- High Drive & High Level: ปรับระดับ Distortion และระดับเสียง Output สำหรับสัญญาณความถี่สูงที่ผ่านการแตกเสียง
- 4-Band Active EQ: การปรับแต่งโทนเสียงที่แม่นยำด้วย Low Shelf (±12dB @ 80 Hz), 500 HZ (±12dB), 1 KHZ (±12dB), และ High Shelf (±12dB @ 5 kHz)
- Direct Output (XLR) และ Ground Lift: มีช่องต่อ Direct Output แบบ Balanced และสวิตช์ Ground Lift สำหรับเชื่อมต่อตรงเข้าสู่ PA หรือมิกเซอร์ในสตูดิโอได้อย่างปราศจากเสียง Ground Noise
อิสระแห่งโทนเสียงเบส
Darkglass Microtubes X7 มอบการควบคุมที่ยอดเยี่ยมเหนือกาลเวลาด้วยการจำลองเทคนิคสตูดิโอมาไว้ในรูปแบบ stompbox ขนาดกะทัดรัด ด้วยการควบคุม High Pass และ Low Pass ที่แม่นยำ พร้อมด้วย EQ 4 แบนด์ ทำให้คุณสามารถสร้างเสียงแตกเบสที่มีความชัดเจนและคงความแน่นของเสียงต่ำไว้ได้ตลอดเวลา ไม่ว่าคุณจะต้องการเสียง Overdrive ที่สุภาพหรือ Fuzz ที่ดุดัน Microtubes X7 คือเครื่องมือที่จำเป็นสำหรับการสร้างสรรค์โทนเสียงเบสในระดับมืออาชีพ หากคุณต้องการพลังเสียงเบสที่แม่นยำและไร้ขีดจำกัด นี่คือเพดัลที่คุณไม่ควรพลาด
รายละเอียดคุณสมบัติ
Darkglass Microtubes X7: ข้อมูลจำเพาะและการควบคุม |
|
|---|---|
| การควบคุมเสียงแตก (High Pass Freq) | ควบคุมความถี่ที่ถูกแตกเสียง (100Hz สำหรับ Fuzz/หนา, 1kHz สำหรับคมชัด) |
| การควบคุมเสียงคลีน (Low Pass Freq) | ควบคุมความถี่คลีนที่ผสมกลับ (50Hz Sub-Bass, 500Hz คง Mid คลีน) |
| Low Comp | กำหนดระดับการบีบอัด (Compression) สำหรับสัญญาณความถี่ต่ำ |
| Low Level / Master | ตั้งค่าระดับเสียงโดยรวมของยูนิต |
| High Drive / High Level | ปรับปริมาณ Distortion และระดับเสียง Output ของสัญญาณความถี่สูง |
| ภาค EQ (Low Shelf) | ±12dB ที่ 80 Hz |
| ภาค EQ (500 HZ / 1 KHZ) | ±12dB ที่ 500 Hz และ 1 kHz |
| ภาค EQ (High Shelf) | ±12dB ที่ 5 kHz |
| ช่องต่อ Output | ¼” Output, Direct Output (XLR Balanced), Parallel Output (Passthrough) |
| Ground Lift | ใช้ยก Ground ของ XLR Output หากมี Ground Noise |
| ขนาด (กว้าง x ยาว x สูง) | 94 มม. x 120 มม. x 46 มม. (3¾″ x 4¾″ x 1¾″) |
| น้ำหนัก | 320 กรัม (0.7 ปอนด์) |
| ข้อกำหนดด้านกำลังไฟ | 9V DC, 100mA, ขั้วลบตรงกลาง (Center-Negative) |
