AKG MK HS Studio D

ราคา : (กรุณาสอบถาม)
✅ ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ
🚀 จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล
Description
AKG MK HS Studio D
The AKG MK HS Studio D is a cable that converts your headphones into a headset, similar to the Studio C model, but with key differences in microphone type and connector design, made for use with different headphone series, as follows:
Key features
-
For dynamic microphones: This cable is designed for use with AKG HSD series headphones (such as HSD271, HSD171) which are equipped with a dynamic microphone.
-
No Phantom Power Required: Because it’s designed for dynamic microphones, it can be plugged in and used immediately without needing to activate +48V phantom power like the Studio C model (which uses condenser microphones).
-
The headphone connector is a 6-pin Mini XLR: This is very important because the Studio D model uses a 6-pin connector to completely separate the headphone and microphone audio signals (unlike typical headphone cables that use 3-pin).
-
Coiled cable design: Prevents the cable from snagging or tangling during movement, increasing flexibility in a broadcasting room or studio.
Specification
Technical specifications
| section | details |
| headphone connector | 6-pin Mini XLR (Female) |
| Output connector | 1/4″ (6.3mm) TRS connector for headphones and 3-pin XLR (male) connector for microphone. |
| Supported microphone types | Dynamic (Hypercardioid) |
| Cable length | Approximately 1.8 – 2.5 meters (coiled). |
| color | Matte Black |
ข้อมูลสินค้า
AKG MK HS Studio D
AKG MK HS Studio D เป็นสายเคเบิลสำหรับเปลี่ยนหูฟังให้เป็นชุด Headset เช่นเดียวกับรุ่น Studio C ครับ แต่มีความแตกต่างสำคัญที่ ชนิดของไมโครโฟน และ ขั้วต่อ ที่ออกแบบมาเพื่อใช้งานร่วมกับหูฟังคนละซีรีส์
จุดเด่นที่สำคัญ
-
สำหรับไมโครโฟนไดนามิก (Dynamic Mic): สายรุ่นนี้ออกแบบมาเพื่อใช้งานกับหูฟัง AKG ตระกูล HSD (เช่น HSD271, HSD171) ซึ่งติดตั้งไมค์แบบ Dynamic มาให้
-
ไม่ต้องใช้ไฟเลี้ยง (No Phantom Power): เนื่องจากใช้กับไมค์ Dynamic จึงสามารถเสียบใช้งานได้ทันทีโดยไม่ต้องเปิดไฟ Phantom +48V เหมือนรุ่น Studio C (ที่เป็นคอนเดนเซอร์)
-
ขั้วต่อฝั่งหูฟังแบบ 6-pin Mini XLR: จุดนี้สำคัญมากครับ เพราะรุ่น Studio D จะใช้ขั้วต่อ 6-pin เพื่อแยกสัญญาณเสียงหูฟังและไมค์ออกจากกันอย่างสมบูรณ์ (ต่างจากสายหูฟังทั่วไปที่ใช้ 3-pin)
-
ลักษณะสายแบบขด (Coiled Cable): ช่วยให้สายไม่รั้งหรือพันกันขณะเคลื่อนไหว เพิ่มความคล่องตัวในห้องจัดรายการหรือสตูดิโอ
รายละเอียดคุณสมบัติ
ข้อมูลทางเทคนิค (Specifications)
| หัวข้อ | รายละเอียด |
| ขั้วต่อฝั่งหูฟัง | 6-pin Mini XLR (Female) |
| ขั้วต่อฝั่ง Output | 1/4″ (6.3mm) TRS สำหรับหูฟัง และ XLR 3-pin (Male) สำหรับไมค์ |
| ประเภทไมโครโฟนที่รองรับ | Dynamic (Hypercardioid) |
| ความยาวสาย | ประมาณ 1.8 – 2.5 เมตร (แบบขด) |
| สี | ดำด้าน (Matte Black) |
