AEA RPQ2
Description
Ideal Preamp for Your Ribbon Mics
AEA has updated their acclaimed RPQ 2-channel microphone preamp with front-panel DI inputs, rear-panel inserts, and a secondary balanced output. Just like the original, the RPQ2 supplies copious gain for low-output microphones such as AEA’s superb ribbon mics. The RPQ2’s high headroom, 81dB of clean gain, and ultra-quiet performance make it a great choice for any mic in your locker. AEA’s proprietary CurveShaper circuit helps you get the best high-frequency performance possible, while the onboard highpass filter gives you control over proximity effect. With its high-grade JFET circuitry, wide dynamic range, and road-tough construction, the AEA RPQ2 is quite an impressive mic preamp.
AEA RPQ2 2-channel Ribbon Microphone Preamp at a Glance:
- Plenty of clean gain and headroom
- Ideal for controlling proximity effect
- Add presence and air to your ribbon mics
- Works great as a studio processor in line mode
Plenty of clean gain and headroom
The AEA RPQ2 ribbon preamp with CurveShaper provides two channels of high-quality, high-gain, low-noise microphone preamplification, with phantom power for your mics that require it. Particularly well-suited for use with ribbon microphones, it delivers the speed, precision, quietness, and headroom needed for today’s high-resolution recordings. The JFET circuit design generates up to 81dB of clean and quiet gain, with extended bandwidth from below 1Hz to beyond 200kHz, for dynamic range and transient response that complements all your microphones.
Ideal for controlling proximity effect
The AEA RPQ2 gives you the tools to control your ribbons. Ribbon mics are capable of delivering robust lows and can have a significant bass proximity effect. Such strong low-frequency content can mask clarity and intelligibility, so the RPQ2’s tunable highpass filter was engineered to tame low-frequency energy to appropriate levels.
Add presence and air to your ribbon mics
Sweetwater engineers know that high-frequency roll-off is a frequent fact of life with ribbon microphones, distant mic placement, or an overly dry acoustical environment. The RPQ2’s CurveShaper circuit compensates for this, letting you extend and sweeten the high end by adding a little extra presence and air to your signal.
Works great as a studio processor in line mode
After hearing that several users were implementing their RPQ preamps into the signal chain during mixdown (those EQ controls certainly are amazing), AEA added a very handy line-level input mode. This functionality lets you switch the RPQ2 to line level and use the preamp’s EQ controls for signal processing during mixdowns and even mastering.
Specification
AEA RPQ2 2-channel Ribbon Microphone Preamp Features:
- Plenty of headroom and gain
- Perfect preamp for ribbon microphones
- Front-panel 1/4″ DI inputs for plug-and-play convenience
- Rear-panel post-mic, pre-EQ inserts make adding effects easy
- Allow each channel’s preamp and EQ sections to be used independently
- Switchable phantom power, polarity, and mic/line mode, each with LED indicators
- High-impedance circuitry brings out your mic’s full clarity
- CurveShaper EQ adds presence and air to your signal
- Highpass filter lets you control proximity effect
- Use it as a post-processing tool in line mode for running mixes and masters through
- 1U steel and aluminum chassis with built-in power supply
ข้อมูลสินค้า
พรีแอมป์ที่สมบูรณ์แบบสำหรับไมโครโฟนริบบอนของคุณ
AEA ได้ปรับปรุงพรีแอมป์ไมโครโฟน RPQ 2 ช่องสัญญาณอันโด่งดัง ด้วยอินพุต DI ที่แผงด้านหน้า, ช่องใส่ที่แผงด้านหลัง และเอาต์พุตแบบบาลานซ์สำรอง เช่นเดียวกับรุ่นดั้งเดิม RPQ2 ให้เกนที่มากเพียงพอสำหรับไมโครโฟนเอาต์พุตต่ำ เช่น ไมโครโฟนริบบอนคุณภาพเยี่ยมของ AEA RPQ2 มีเฮดรูมสูง, เกนคลีน 81dB และประสิทธิภาพการทำงานที่เงียบเป็นพิเศษ ทำให้เป็นตัวเลือกที่ยอดเยี่ยมสำหรับไมโครโฟนทุกตัวในบ้านของคุณ วงจร CurveShaper ลิขสิทธิ์เฉพาะของ AEA ช่วยให้คุณได้ประสิทธิภาพความถี่สูงที่ดีที่สุดเท่าที่จะเป็นไปได้ ขณะที่ฟิลเตอร์ไฮพาสในตัวช่วยให้คุณควบคุมเอฟเฟกต์ Proximity ได้ ด้วยวงจร JFET คุณภาพสูง ช่วงไดนามิกที่กว้าง และโครงสร้างที่ทนทานต่อการใช้งานบนท้องถนน AEA RPQ2 จึงเป็นพรีแอมป์ไมโครโฟนที่น่าประทับใจอย่างยิ่ง
พรีแอมป์ไมโครโฟนริบบอน AEA RPQ2 แบบ 2 ช่องสัญญาณโดยสังเขป:
ให้ค่าเกนและเฮดรูมที่สะอาดและทรงพลัง
เหมาะอย่างยิ่งสำหรับการควบคุมเอฟเฟกต์เสียงแบบ Proximity
เพิ่มระดับเสียงและอากาศให้กับไมโครโฟนริบบอนของคุณ
ใช้งานได้ดีเยี่ยมในฐานะโปรเซสเซอร์สตูดิโอในโหมดไลน์
ให้ค่าเกนและเฮดรูมที่สะอาดและทรงพลัง
พรีแอมป์ริบบอน AEA RPQ2 พร้อม CurveShaper ให้พรีแอมป์ไมโครโฟนคุณภาพสูง ให้ค่าเกนสูง เสียงรบกวนต่ำ สองช่องสัญญาณ พร้อมไฟ Phantom Power สำหรับไมโครโฟนที่ต้องการ เหมาะอย่างยิ่งสำหรับการใช้งานร่วมกับไมโครโฟนริบบอน ให้ความเร็ว ความแม่นยำ ความเงียบ และเฮดรูมที่จำเป็นสำหรับการบันทึกเสียงความละเอียดสูงในปัจจุบัน การออกแบบวงจร JFET สร้างค่าเกนที่สะอาดและเงียบได้สูงถึง 81dB พร้อมแบนด์วิดท์ที่ขยายได้ตั้งแต่ต่ำกว่า 1Hz ไปจนถึงมากกว่า 200kHz เพื่อช่วงไดนามิกและการตอบสนองแบบ Transient ที่สมบูรณ์แบบสำหรับไมโครโฟนทุกตัวของคุณ
เหมาะอย่างยิ่งสำหรับการควบคุมเอฟเฟกต์เสียงแบบ Proximity
AEA RPQ2 มอบเครื่องมือสำหรับการควบคุมริบบอนของคุณ ไมโครโฟนแบบริบบิ้นสามารถส่งมอบเสียงต่ำที่หนักแน่นและให้เอฟเฟกต์เสียงเบสที่ใกล้เคียงได้อย่างชัดเจน เนื้อหาความถี่ต่ำที่หนักแน่นเช่นนี้อาจบดบังความชัดเจนและความชัดเจนของเสียง ดังนั้นฟิลเตอร์ไฮพาสแบบปรับได้ของ RPQ2 จึงถูกออกแบบมาเพื่อควบคุมพลังงานความถี่ต่ำให้อยู่ในระดับที่เหมาะสม
เพิ่มระดับเสียงและอากาศให้กับไมโครโฟนแบบริบบิ้นของคุณ
วิศวกรของ Sweetwater ทราบดีว่าการลดความถี่สูงเป็นเรื่องปกติสำหรับไมโครโฟนแบบริบบิ้น การวางไมโครโฟนในระยะไกล หรือสภาพแวดล้อมอะคูสติกที่แห้งเกินไป วงจร CurveShaper ของ RPQ2 ช่วยชดเชยสิ่งนี้ ช่วยให้คุณขยายและเพิ่มความหวานให้กับเสียงสูงได้โดยการเพิ่มระดับเสียงและอากาศให้กับสัญญาณของคุณ
ใช้งานได้ดีเยี่ยมในฐานะโปรเซสเซอร์สตูดิโอในโหมดไลน์
หลังจากได้ยินว่ามีผู้ใช้หลายคนนำพรีแอมป์ RPQ ของพวกเขาไปใช้กับวงจรสัญญาณระหว่างการมิกซ์ดาวน์ (การควบคุม EQ เหล่านี้ยอดเยี่ยมมากจริงๆ) AEA จึงได้เพิ่มโหมดอินพุตระดับไลน์ที่มีประโยชน์มาก ฟังก์ชันนี้ช่วยให้คุณสลับ RPQ2 ไปที่ระดับไลน์และใช้การควบคุม EQ ของพรีแอมป์สำหรับการประมวลผลสัญญาณระหว่างการมิกซ์ดาวน์และแม้กระทั่งการมาสเตอร์
รายละเอียดคุณสมบัติ
พรีแอมป์ไมโครโฟนริบบอน AEA RPQ2 2 ช่องสัญญาณ คุณสมบัติ:
เฮดรูมและเกนที่กว้างขวาง
พรีแอมป์ที่สมบูรณ์แบบสำหรับไมโครโฟนริบบอน
อินพุต DI ขนาด 1/4 นิ้วที่แผงด้านหน้าเพื่อความสะดวกสบายแบบเสียบแล้วใช้งานได้ทันที
แผงด้านหลังมีช่องใส่โพสต์ไมโครโฟนและพรีอีคิว ช่วยให้เพิ่มเอฟเฟกต์ได้ง่าย
ให้ส่วนพรีแอมป์และอีคิวของแต่ละช่องสัญญาณสามารถใช้งานแยกกัน
สลับโหมดไฟแฟนทอม โพลาริตี้ และไมค์/ไลน์ได้ พร้อมไฟ LED แสดงสถานะ
วงจรอิมพีแดนซ์สูงช่วยขับเน้นความคมชัดของไมโครโฟนของคุณอย่างเต็มที่
CurveShaper EQ เพิ่มมิติเสียงและอากาศให้กับสัญญาณของคุณ
ฟิลเตอร์ไฮพาสช่วยให้คุณควบคุมเอฟเฟกต์ระยะใกล้ได้
ใช้เป็นอุปกรณ์หลังการประมวลผลในโหมดไลน์สำหรับการมิกซ์และมาสเตอร์ผ่าน
โครงเหล็กและอะลูมิเนียมขนาด 1U พร้อมแหล่งจ่ายไฟในตัว


