This professional hypercardioid shotgun mic, the Synco Mic-D1 is constructed with CNC brass metal and is designed for professionals who want broadcast quality results.
Broadcast Audio Quality
Designed for use out in the field or in a studio environment, the Synco D1 has a 78dB SNR (signal to noise ratio) and a gold plated XLR connector for the best results.
This mic will provide stunning results in your video production minimising signal noise and ambient sound. A selectable high-pass filter further minimises unwanted low frequency sounds and rumbles below 180 Hz. This filter is effective for sounds like motor noises, air-conditioners, blowers and similar.
Works with & Without Phantom Power
The mic is compatible with devices which supply 48V phantom power such as professional video cameras, mixing boards and recording devices. It can also work with devices which do not offer phantom power such as some DSLRs, mirrorless cameras and PCs through use of one AA battery. An adapter may be required to plug these into your device.
The Synco Mic D1 uses a directional hyper-cardioid microphone pattern, meaning that it picks up the sound right in front of it and rejects side and rear audio. The high sensitivity of -32dB (±2dB) focuses on rich details.
CNC Brass Metal Construction
Using instrument grade machined brass, the SYNCO MIC-D1 is elegant in look and solid. The brass material does not damp the acoustic vibration thus delivering a clear and bright sound tone. The brass also provides an extra level of security with its interference capabilities.
|Transducer||Back Electret Condenser|
|Frequency Response||40Hz to 20KHz|
|Dynamic Range||106dB/ 91dB 11KHz at Max. SPL|
|Power Supply||Phantom Power 48V/ 1.5V AA Battery|
|Signal/Noise||78dB (1KHz at 1Pa)|
|Sensitivity||-34dB/32dB±2dB (1dB=1V/Pa at 1KHz)|
|Max. Input SPL||450Ω±20% (at 1KHz)|
|Low Frequency Roll-off||48V DC, 2mA|
|Dimensions||11.22 x 0.83 inches|