LINE


AMT ELECTRONICS E-DRIVE – JFET DISTORTION PEDAL

คลิ๊กที่ภาพเพื่อขยาย
ยี่ห้อ : AMT

ราคา : (กรุณาสอบถาม)

รุ่น :  AMT E-DRIVE เอฟเฟค Effects
การจัดส่ง : ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ / จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล
การชำระเงิน : จ่ายหน้าร้าน 8 สาขา / โอนเงิน / เก็บปลายทาง / บัตรเครดิต /ผ่อนชำระ 0% (บางรายการ) / Shopee / Lazada

ลูกค้าองค์กร/ใบเสนอราคา
E-mail
: musicarmsproject@gmail.com

สั่งซื้อ AMT ELECTRONICS E-DRIVE – JFET DISTORTION PEDALผ่านline สั่งซื้อ AMT ELECTRONICS E-DRIVE – JFET DISTORTION PEDALผ่าน messenger

วีดีโอ


Description

FEATURES OVERVIEW

Drive Series effects are designed to be connected in front of a “clean” channel inputs of guitar combos or amplifiers, and do not have a cabinet simulated output as the Legend Amp Series. These pedals allow guitarists to obtain warm, crisp, natural tube sounds of their favorite high gain amplifiers, while preserving individuality and tone of the instrument and equipment.

In the Drive Series, AMT uses new original circuitry solutions developed by AMT specialists based on real actual tube stage emulation and response. The result is bright, rich, full, and powerful distortion sounds.

 

Specification

The AMT E-DRIVE was designed for guitarists looking for distoriton sounds similar to that of Engl* amplifiers.

When using Drive Series Effects, the resulting sound is mainly influenced by the combo or amplifier you use, as well as the speakers installed in your cabinet. The Drive Series were designed for guitarists who do not need or desire the speaker emulation of the Legend Amp Series.

Drive Series pedals provide massive gain, and tonal perfection; just as the tube heads they represent!

CONTROLS:

  • The pedal sensitivity and drive/distortion amount is determined by the position of GAIN control.
  • The overall output level is determined by the position of LEVEL control. It’s range of adjustment provides the standard minimum level of -10dB and reaches +8 dB at it’s maximum position.
  • The pedal also features a simplified TONE control, which is designed for general tone matching of the pedal to your amplifier. Further EQ adjustment may be made on the expanded preamp section of your amplifer.
  • A VOICE switch to cut some mids.
  • Standard 9vDC (-) negative center power required. Voltage consumption is low, running at only (less than 4mA) of power.
  • TRUE BYPASS circuitry. No tone coloration, signal degregation, or loss while pedals is not in use.

 

 

ข้อมูล

เอฟเฟคไดร์ฟที่เกิดมาเพื่อต่อกับหน้าตู้เสียงคลีนแอมป์คอมโบต่างๆ, โดยที่ไม่ต้องใช้แอมป์ซิมมิเรเตอร์ . เป็นเอฟเฟคที่ตอบสนองความมือกีต้าร์ที่ต้องการ ซาวด์ที่ อุ่นคล้ายแอมป์หลอด .ซึ่งในไดร์ฟซีรี่ทุกรุ่นถูกออกแบบวงจรแบบโดยทีมงาน เอเอ็มที  ซึ่งได้ซาวด์ที่คล้ายแอมป์หลอด ถือว่าแป็นรุ่นที่.ให้ซาวด์ครบครันทุกความต้องการ

 

สเปค

AMT E-DRIVE ถูกดีไซด์มาเป็นเสียง ดิสตอร์ชั่น ซึ่งรู่นนี้ถูกออกแบบมาจำลองเสียงของแอมป์  ENGL

  • ปุ่ม GAIN คอนโทรลแบบเซนซิทีฟ
  • ปุ่มโทนดีไซด์ย่านเลียงมาให้แมทกับแอมป์หลากหลายประเภท.
  • ปุ่ม VOICE ออกแบบมาเพื่อตัดย่านเสียงกลาง
  • ใช้ไฟแบบ สเตนดาร์ด 9V DC
  • เป็นวงจรแบบทรูบายพาส

×