ยี่ห้อ : IK

ราคา : 6,990 บาท

รุ่น :  IK iRig PRO I/O ออดิโอ อินเตอร์เฟส Audio Interface
การจัดส่ง : ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ / จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล
การชำระเงิน : จ่ายหน้าร้าน 8 สาขา / โอนเงิน / เก็บปลายทาง / บัตรเครดิต /ผ่อนชำระ 0% (บางรายการ) / Shopee / Lazada


สั่งซื้อ IK iRig PRO I/Oผ่านline สั่งซื้อ IK iRig PRO I/Oผ่าน messenger



iRig Pro:Pocket-sized, Full-featured Audio and MIDI Interface

With IK Multimedia’s iRig Pro I/O, you get rack-quality mobile recording and monitoring in real time with any compatible mobile device or portable PA. IK engineered the iRig Pro I/O with 24-bit A/D and D/A converters with a 96kHz sample rate, a 1/4″ hi-Z/XLR combo input that easily handles passive and active pickup configurations, MIDI in/out, and an 1/8″ stereo headphone out with preamp and level control (making it compatible with even the most recent iOS and Android devices). To top it off, the IK Multimedia iRig Pro I/O has switchable 48-volt phantom power for use with your favorite condenser mics!


iRig Pro has 24-bit/96kHz sampling for quality digital audio conversion

IK Multimedia is known for sandwiching fully functional A/D and D/A converters into superbly portable devices, so it’s no surprise that the iRig Pro I/O features both — capturing 24-bit digital audio at 96kHz and then reconverting your signal into clean, high-quality analog audio. There’s no need for outboard rack gear; just plug in, play, and let the iRig Pro I/O work the conversion magic for you. Sweetwater singer/songwriters love the iRig Pro!


IK Multimedia knows the ins and outs

The iRig Pro I/O gives you all the connectivity you need to record just about any instrument — as well as any device with a line-level output — and then easily monitor the recording. You get a 1/4″ hi-Z TRS/XLR Neutrik input, MIDI in and out, and a Lightning/USB output (MIDI, Lightning, and USB cables are included) with the iRig Pro. In addition, the iRig Pro has an 1/8″ stereo output, so you can monitor the signal even while using the Lightning port with the latest iOS device. A global gain wheel regulates the input amplitude, and the stereo output has its own preamp and level control wheel for studio-quality on-the-go monitoring.


IK Multimedia iRig Pro I/O Features:

  • 24-bit/96kHz sampling gives you studio-quality A/D conversion in the field
  • 1/4″ hi-Z/XLR Neutrik input, MIDI in/out, and Lightning/USB port provide unequaled connectivity
  • 1/8″ stereo output with preamp and level control lets you easily monitor your signal
  • Lightning port can be used with the latest iOS device while monitoring through the 1/8″ stereo out
  • 48-volt phantom power means you can use the iRig Pro I/O with any condenser mic
  • Can be powered with batteries or optional 5.4-volt DC power supply, which also charges iOS devices
  • MIDI, Lightning, and USB cables, and 2 AA batteries included


Microphone Input

  • Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 3.2 kOhms
  • Gain Range: 40 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Instrument Input: unbalanced, Hi-Z, TS 1/4″ Jack, Tip: signal / Shield: ground
  • Instrument Input Level: from 30 mVpp to 6.9 Vpp
  • Instrument Input Impedance: 1 MOhms
  • Gain Range: 27 dB
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Control numbered thumbwheel
  • Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

  • Connector: 2×2.5mm TS Jack

Other Input/Output

  • DC barrel: 1x DC barrel. For power and device charging.
  • Device Connector: mini-DIN


  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power:USB bus powered when used with a computer,Battery powered (2xAA included) when used with an iOS device,DC power supply (not included, iRig PSU 3A sold separately)*

Package includes

  • iRig Pro I/O universal Audio-MIDI interface
  • Lightning to Mini-DIN connection cable with charging features (60cm/23.62″)
  • USB-A to Mini-DIN connection cable (60cm/23.62″)
  • 2.5mm TRS male to MIDI female adapter (10cm / 3.9″)
  • 2 x 1.5V AA Battery
  • Velcro strip


  • Size: 43mm/1.69″ x 127mm/5″ x 37mm/1.46″
  • Weight: ~120g/4.23oz (batteries excluded)