Kemper Profiler Remote Footswitch

The Kemper Profiler Remote was designed to work in perfect harmony with your existing Profiler. A solid connection between your Profiler and the Remote lets you tinker and create to your hearts content, without any prior knowledge of MIDI or the like needed to get going. Versatility and ease of use are the name of the game.

Built for Gigging Musicians

A number of smart features help to enhance your live playing experience. The robust, compact housing means it’ll stand up to the trials and tribulations of regular gigging. Its sizeable, illuminated screen lets you reference your current settings easily at a glance, allowing you to see the key information, even when you’re on a dark stage.

Innovation Across the Board

Five individual sounds or “Rigs” can be accessed through each of the five buttons spread across the bottom part of the floor board. Further buttons are then assigned to tap in the tempo, the tuner and the exclusive “Looper” effect. One press of this particular button transforms the Remote into a powerful, looper control station. You’ll be able to record loops up to 30 seconds in length (or a minute at half speed), which can then be reversed, played back at a slower rate, or undone completely. Each loop can also be recorded, deleted and overdubbed using the intuitive buttons located on the board.

Simple Setup

Setting up is a straightforward and hassle-free procedure. You simply connect the remote using just one ethernet cable, which is then fed into your Profiler. You don’t need any other extra power supplies to get started! You’ll then be able to use up to four continuous foot pedals – which can be utilised to effect different settings within your Profiler. An additional four buttons let you switch effects off and on. Kemper have described the setting up process, which is “easier to learn than putting a new contact into your cell phone”.

Footswitch Remote Control

• For the Kemper Profiler Rack & Head
• Large backlit display
• Sturdy metal housing
• Five buttons for direct rig selection
• Direct access to tuner, tap tempo and looper via dedicated buttons
• Single-cable solution
• Cable with length of up to 100 metres is possible
• 4 Additional pedals can be connected
• Controls: Contrast
• Footswitch: Rig Buttons 1-5, Tap, Up, Down, Effect Buttons 1-4, Tuner, Looper
• Connectors: Pedal 3-6 (4 x 6.3 mm stereo jack), Network
• Dimensions (W x D x H): 42 x 18 x 8 cm
• Weight: 3 kg

• ฟุตสวิตช์ควบคุมระยะไกล
• สำหรับ Kemper Profiler Rack & Head
• จอแสดงผลแบบเรืองแสงขนาดใหญ่
• ตัวเครื่องโลหะที่แข็งแรง
• ห้าปุ่มสำหรับการเลือกอุปกรณ์โดยตรง
• เข้าถึงจูนเนอร์ แท็ปเทมโป และลูปเปอร์ได้โดยตรงผ่านปุ่มเฉพาะ
• วิธีแก้ปัญหาด้วยสายเคเบิลเส้นเดียว
• สายไฟยาวได้ถึง 100 เมตร
• สามารถต่อคันเหยียบเพิ่มเติมได้
• การควบคุม: Contrast
• ฟุตสวิตช์: Rig Buttons 1-5, Tap, Up, Down, Effect Buttons 1-4, Tuner, Looper
• ตัวเชื่อมต่อ: Pedal 3-6 (แจ็คสเตอริโอ 4 x 6.3 มม.), เครือข่าย
• ขนาด (กว้าง x ลึก x สูง) : 42 x 18 x 8 ซม.
• น้ำหนัก : 3 กก.