fbpx
LINE


Mackie DL16S

คลิ๊กที่ภาพเพื่อขยาย
ยี่ห้อ : Mackie
รุ่น :  Mackie DL16S Digital Mixer
การจัดส่ง : ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ / จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล

ราคา : 29,900 บาท

การชำระเงิน : จ่ายหน้าร้าน 6สาขา / โอนเงิน / เก็บปลายทาง / บัตรเครดิต /ผ่อนชำระ 0% (บางรายการ) / Shopee / Lazada

สั่งซื้อ Mackie DL16Sผ่านline สั่งซื้อ Mackie DL16Sผ่าน messenger

วีดีโอ


YouTube video

Description

16-channel Rack Mixer with Built-in Wi-Fi

Put a Mackie DL16S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie’s Master Fader control app. 16 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL16S also functions as a 16-in/16-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL16S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL16S gets you into your mix like never before.

 

Control everything from anywhere with wireless mixing

Leave that bulky snake at home! Because you can control the Mackie DL16S with your iPad, you can place it anywhere. Even if the DL16S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL16S supports up to 20 iPads at once, multiple engineers can work from one DL16S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would have needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL16S in your rack, all you need is an iPad and your fingers!

 

All your connections are covered

With the Mackie DL16S in your live rig, you’ll never run short of I/O. Providing you with 16 stereo-linkable input channels, 8 fully assignable XLR outputs, and 16 great-sounding Onyx+ mic preamps, the DL16S has your I/O needs covered. On top of that, you also get 13 output buses, 6 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output. And best of all, the DL16S gives you total recall of your settings!

 

Integrated USB 2.0 audio interface

One of the Mackie DL16S’s most useful features is multitrack recording and playback. Use the DL16S as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual sound check. You can also use your DAW’s audio plug-ins in a live environment. The DL16S is a value-packed, high-channel-count studio recording solution.

 

Create polished, professional-sounding mixes

Packed with DSP, the Mackie DL16S gives you 16 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 13 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.

 

A large-format console in the palm of your hand

The Mackie DL16S supplies 16 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie’s Master Fader control app. The DL16S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you’re serious about live sound, you owe it to yourself to check out the DL16S.

 

Mackie DL16S Features:

  • Ample I/O including 16 stereo-linkable input channels, 8 fully assignable XLR outputs, 13 output buses, 6 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output
  • 16 recallable Onyx+ mic preamps deliver top-notch sound
  • Wireless mixing allows you to take control of your mix via an iPad
  • Tweak your mix, processing, and routing from anywhere in the venue
  • Built-in Wi-Fi networking and instant recall ensure easy setup
  • Supports up to 20 iPads at once to accommodate multiple engineers
  • 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes
  • 16-in/16-out USB interface for recording straight to your DAW
  • Play intermission music, backing tracks, and more
  • Play back your full multitrack recording for a virtual sound check
  • Use your DAW’s audio plug-ins in a live environment

Specification

  • Type:Digital Stage Box Mixer
  • Channels:16 input channels, 32 mixing channels
  • Inputs – Mic Preamps:8 x XLR, 6 x XLR-1/4″ combo, 2 x XLR-1/4″ combo (mic/line/Hi-Z)
  • Outputs – Main:2 x XLR (L/R, assignable), 6 x XLR (assignable)
  • Aux Sends:6 x Stereo Sends
  • Busses/Groups:6 x Stereo Sub Groups, 13 x Output Busses, 6 x Mute Groups
  • Data I/O:1 x RJ45 (external control)
  • USB:1 x Type B
  • Computer Connectivity:USB (16 x 16), Wi-Fi
  • Headphones:1 x 1/4″
  • EQ Bands:4-band Parametric EQ, Highpass Filter
  • Effects:4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange
  • Signal Processing:Gate, Compressor
  • Software:Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)
  • Height:5.6″
  • Depth:5.8″
  • Width:14.1″
  • Weight:6.2 lbs.

×