PreSonus Faderport 16

PreSonus Faderport 16
PreSonus Faderport 16 is a surface control device with 16 faders, each 100 mm in length, which is standard, and features motorized faders for moving up and down for convenient automation and excellent tactile response. It supports native control for PreSonus Studio One and also supports HUI and Mackie Control Universal protocols, allowing smooth and fast DAW control.

Features

– Motorized faders for precise control
– 16 touch-sensitive 100 mm motorized faders
– Common session controls including Undo/Redo, Arm All, Solo/Mute Clear, and Click On/Off with tap tempo
– Session Navigator controls including Track Scrolling, Channel Banking, Timeline Scrolling, and more
– Channel controls including Level, Pan, Solo, Mute, and Rec Arm
– Automation modes including Touch, Latch, Trim, Write, Read, and Off
– Faders also control common plugin settings, bus sends, and pan positions
– Native support for Studio One DAW software, along with HUI and Mackie Control Universal support for other DAWs (including Studio One Artist)

Connect via USB 2.0. The foot switch input allows hands-free start/stop (foot switch not included).

COMPUTER SYSTEM REQUIREMENTS:

Below are the minimum computer-system requirements for the FaderPort™ 16:

Mac

• Mac® OS X 10.8.5 64-bit or later
• Intel® Core™ 2 Duo processor (Intel Core i3 or faster recommended)
• 4 GB RAM (8 GB or more recommended)

Windows

• Windows® 7 x64/x86 SP1 + platform update, Windows 8.1 x64/x86, Windows 10 x64/x86
• Intel Core 2 Duo (Intel Core i3 or faster recommended)
• 4 GB RAM (8 GB or more recommended)

Mac and Windows Systems

• USB 2.0 port
• Internet connection required for driver and bundled software installation
• 30 GB hard disk space*
• Monitor with 1366 x 768 resolution (high-dpi monitor recommended)*

* Required for Studio One

Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.

PRESONUS FADERPORT 16 HAS BEEN TESTED AND APPROVED TO WORK WITH THE FOLLOWING SOFTWARE:

• Native Mode
  • PreSonus® Studio One® 3.5.3
• HUI Emulation
  • Supported by Pro Tools 12
• Mackie Control Emulation*
  • Supported by Logic, Cubase, Nuendo, Sonar, and Ableton

*Users of third-party DAWs not listed that support the Mackie Control protocol, such as Reason, Bitwig Studio, and Reaper, should contact their DAW vendor for support.

As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.​​

Specifications

• Type:Mixing Control Surface
• Faders:16 x 100mm (motorized)
• Controls:1 x Pan/Parameter
• Number of Soft Keys:Solo, Mute, Select
• Transport Controls:Yes
• Computer Connectivity:USB
• USB:1 x Type B
• Control I/O:1 x 1/4″ (footswitch)
• Software:Studio One Artist
• Compatibility:HUI (Pro Tools 12), Mackie Control (Logic 10.4, Cubase 9.4, Ableton 9.7, Sonar
• Hardware Requirements – Mac:Intel Core i3 or higher, 8GB RAM or more recommended
• Hardware Requirements – PC:Intel Core i3 or higher, 8GB RAM or more recommended
• OS Requirements – Mac:OS X 10.8.5 64-bit or later
• OS Requirements – PC:Windows 7 SP1 or later
• Platforms:Presonus Studio One 3.5.3 (Native Mode)
• Power:12V DC 1.2A power supply (included)
• Height:2.11″
• Width:19.6″
• Depth:11.9″
• Weight:8 lbs.
• Manufacturer Part Number:Faderport 16

• มอเตอร์สำหรับควบคุมเฟดเดอร์
• เฟดเดอร์มอเตอร์ขนาด 100 มม. ที่ไวต่อการสัมผัส 16 ตัว
• การควบคุมช่อง ได้แก่ Level, Pan, Solo, Mute และ Rec Arm
• การควบคุมอัตโนมัติประกอบด้วย Touch, Latch, Trim, Write, Read และ Off
• เฟดเดอร์ยังควบคุมการตั้งค่าปลั๊กอินทั่วไป บัสส่ง และตำแหน่งแพน
• เชื่อมต่อผ่าน USB 2.0