SYNCO M3, a DSLR camera microphone, holds every detail to pick up sound better than any microphone of its size, including well-designed 3-level adjustable gain control, above-industry-average 100Hz low cut filter, and daily-use accessories. It helps add audio brilliance to the present visual feast. The strong compatibility gives this DSLR microphone every possibility to perform in a documentary, wedding, vlog recording, etc.
Supercardioid Pickup Pattern
SYNCO camera microphone M3 carries a supercardioid pickup pattern, which is excellent in minimizing noises and ambiances off-axis. The condenser capsule captures intact audio details and outputs natural, desired sound.
3-Level Gain Control
The professional DSLR camera microphone is modified to have a 3-level gain control (-10dB, 0dB, +10dB) to improve the input signals. Use it to control the recording directly when problems found during the 3.5mm output interface based real-time monitoring.
LCF at 100Hz
SYNCO external microphone for camera M3 offers a 100Hz low cut filter to eliminate low-frequency noises caused by airflow, shake, electrical current, or traffic. Thus clear and crisp sound without unwanted rumbles is captured.
The package includes a cotton wind muff to minimize wind noises, a PA-made shock mount to ease unexpected shake, a canvas pouch to protect this DSLR camera microphone from scratch, and 3.5mm TRS/TRRS cables to get adapted to more devices.
The LED indicator on this microphone for camera tells the working status. The light stays green when the mic works properly; otherwise, it is off. No on-and-on audio bar checking or monitoring is needed.
M3 best on camera microphone, Φ32×186mm sized and 52g weighed, can be put into a handbag easily. Just take it out and start recording at any time, any place.
|Frequency Response||30Hz to 20KHz (HPF is optional at 100Hz)|
|Sensitivity||-41dB±2dB RL=0.68KΩ Vs=1.5V (1KHz 0dB=1V/Pa)|
|Max. Input SPL||135dB SPL|
|Output Impedance||0.68KΩ 1KHz (RL=0.68KΩ)|
|Audio Monitoring||3.5mm Headphone Jack|
|Gain Control||+10dB, 0dB, -10dB|
|Low Cut||100Hz Low Cut Optional|
|Power Requirement||DC 1.5V (Two AAA Batteries)|