Walrus Audio Descent Reverb/Octave Machine เอฟเฟคกีตาร์

ราคา : 11,000 บาท
ลูกค้าองค์กร/ใบเสนอราคา
E-mail: musicarmsproject@gmail.com


วีดีโอ

Description
The Descent is a three mode reverb system; hall, reverse, and shimmer. In each mode, the user has the ability to feed +1 and -1 octaves into the reverberated signal. The Hall mode will feature a classic reverb sound that can move your signal from a small-room-echo to a haunting long hall- echo. The Reverse mode smoothly flips your signal to playback unique responses and can be manipulated with pre-delay time controls. Shimmer mode highlights the octave features, dry signal, -1, and +1 to mix in your signal and creates a symphony of sound.
The Descent offers you eight controls to precisely hone in your perfect reverb. In addition, the user can use an auxiliary momentary switch in the fav input to switch the pedal on/off and/or save presets. If you have an already crowded pedal board, you can set your Descent at the back of the board and run a small SPST switch to the front of the board so you don’t lose valuable real estate. The Fav input requires a TRS cable to be used. The expression pedal control works with most on-the-shelf expression pedals. This feature allows the user to set the high and low parameters of each control and then fade in and out the those controls by moving your foot up or down on the expression pedal.
Specification
- Three reverb modes: Hall, Reverse and Shimmer
- Feed +1 and -1 octaves into reverberated signal
- Dry Mix, Reverb Time, Diminish, Tweak, Wet Mix, Dry Signal, -1 and +1 controls
- Remote, Expression, Left Out, Right Out and In jacks
- Dimensions: 5 5/8″ x 4 5/8″ x 1 9/16″
- The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
ข้อมูล
Walrus Audio Descent Reverb/Octave Machine
The Descent คือระบบรีเวิร์บสามโหมด ได้แก่ ฮอลล์ (Hall), รีเวิร์ส (Reverse) และ ชิมเมอร์ (Shimmer) ในแต่ละโหมด ผู้ใช้สามารถป้อนเสียงคู่แปดบวกหนึ่ง (+1) และลบหนึ่ง (-1) อ็อกเทฟเข้าไปในสัญญาณรีเวิร์บได้ โหมดฮอลล์ให้เสียงรีเวิร์บคลาสสิกที่สามารถปรับจากเสียงก้องในห้องเล็กๆ ไปจนถึงเสียงก้องกังวานยาวนาน โหมดรีเวิร์สจะพลิกสัญญาณของคุณอย่างนุ่มนวลเพื่อสร้างเสียงสะท้อนที่เป็นเอกลักษณ์ และสามารถปรับแต่งได้ด้วยการควบคุมเวลา Pre-Delay โหมดชิมเมอร์จะเน้นคุณสมบัติของอ็อกเทฟ, สัญญาณแห้ง, -1 และ +1 เพื่อผสมผสานเข้ากับสัญญาณของคุณและสร้างสรรค์เสียงดั่งซิมโฟนี
The Descent มีส่วนควบคุมแปดส่วนเพื่อให้คุณปรับแต่งรีเวิร์บได้อย่างแม่นยำ นอกจากนี้ ผู้ใช้ยังสามารถใช้สวิตช์ชั่วขณะเสริมในช่อง Fav เพื่อเปิด/ปิดเอฟเฟกต์และ/หรือบันทึกค่าที่ตั้งไว้ล่วงหน้าได้ หากคุณมีแป้นเอฟเฟกต์จำนวนมากอยู่แล้ว คุณสามารถวาง Descent ไว้ด้านหลังบอร์ดและต่อสวิตช์ SPST ขนาดเล็กมาไว้ด้านหน้าบอร์ด เพื่อประหยัดพื้นที่อันมีค่า ช่องต่อ Fav ต้องใช้สาย TRS ส่วนการควบคุมด้วยแป้นเหยียบ Expression สามารถใช้งานได้กับแป้นเหยียบ Expression ทั่วไป คุณสมบัตินี้ช่วยให้ผู้ใช้กำหนดค่าพารามิเตอร์สูงและต่ำของแต่ละส่วนควบคุม จากนั้นจึงค่อยๆ เพิ่มหรือลดค่าเหล่านั้นได้โดยการขยับเท้าบนแป้นเหยียบ Expression
สเปค
- สามโหมดรีเวิร์บ: ฮอลล์ (Hall), รีเวิร์ส (Reverse) และ ชิมเมอร์ (Shimmer)
- ป้อนเสียงคู่แปดบวกหนึ่ง (+1) และลบหนึ่ง (-1) อ็อกเทฟเข้าไปในสัญญาณรีเวิร์บ
- ส่วนควบคุม: Dry Mix (ระดับเสียงแห้ง), Reverb Time (ระยะเวลารีเวิร์บ), Diminish (ลดทอน), Tweak (ปรับแต่ง), Wet Mix (ระดับเสียงรีเวิร์บ), Dry Signal (สัญญาณแห้ง), -1 (ระดับเสียงคู่แปดต่ำลง 1 อ็อกเทฟ) และ +1 (ระดับเสียงคู่แปดสูงขึ้น 1 อ็อกเทฟ)
- ช่องต่อ: Remote (รีโมท), Expression (익스프레션), Left Out (เอาต์พุตซ้าย), Right Out (เอาต์พุตขวา) และ In (อินพุต)
- ขนาด: 5 5/8 นิ้ว x 4 5/8 นิ้ว x 1 9/16 นิ้ว
- แนะนำให้ใช้อะแดปเตอร์จ่ายไฟแบบแยกเดี่ยวสำหรับการจ่ายไฟให้กับเอฟเฟกต์ Walrus Audio ทุกตัว ไม่แนะนำให้ใช้สายพ่วงจ่ายไฟแบบเดซี่เชน