fbpx
LINE


IK iRig PRE HD

คลิ๊กที่ภาพเพื่อขยาย
ยี่ห้อ : IK
รุ่น :  IK iRig PRE HD ออดิโอ อินเตอร์เฟส Audio Interface
การจัดส่ง ซื้อครบ 500 บาท จัดส่งฟรีทั่วประเทศ / จัดส่งด่วนภายในวัน ทั่วกทม. และปริมณฑล

ราคา : 4,690 บาท

การชำระเงิน : ผ่อนไม่ใช้บัตรเครดิต / จ่ายหน้าร้าน / โอนเงิน / เก็บปลายทาง / บัตรเครดิต /ผ่อนชำระ 0% (บางรายการ) / Shopee / Lazada

สั่งซื้อ IK iRig PRE HDผ่านline สั่งซื้อ IK iRig PRE HDผ่าน messenger

วีดีโอ


YouTube video

Description

Mfi Microphone Preamp and Interface

How about recording through your favorite condenser mic — straight into your iOS device — with high-definition 24-bit/96kHz conversion? IK Multimedia lets you do all of that and more with the iRig Pre HD Mfi (Made for iPhone/iPad) microphone interface. Powered by two included AA batteries, the iRig Pre HD Mfi has switchable 48V phantom power that lets you combine the power of your iOS device’s DAW app with the spec’s of your preferred microphone — even heavy-duty, high-dollar studio condenser mics. It features an XLR input, high-performance preamp with an external gain wheel, and a switchable headphone out with discrete level control. There’s a multicolor LED to assist in getting the gain just right, and the iRig Pre HD comes with USB and Lightning cables, as well as a hook-and-loop mounting strip for convenient interface positioning.

iRig Pre HD Mfi Microphone Preamp and Interface Features:

  • Connects your favorite studio condenser or other mic to your iOS device for HD recording
  • 24-bit A/D conversion at up to 96kHz sample rate for pristine HD audio recording
  • 2 included AA batteries supply power for the preamp and also 48V phantom power to your mic
  • XLR input, micro B USB output, and headphone out with on/off switch and level control
  • Multicolor LED indicator helps you set just the right amount of preamp gain
  • USB and Lightning cables, batteries, and hook-and-loop mounting strip included

Specification

Microphone Input

  • Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 2 kOhms
  • Gain Range: 40 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20 kHz +/-1.5dB
  • Input Noise: -97 dB RMS, -105 dB(A)

Stereo Headphone Output

  • Connector: 1/8” TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Control numbered thumbwheel
  • Headphone Level Power 100mW into 50 Ohms

Other Input/Output

  • Device Connector: micro-USB

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power:
    • USB bus powered when used with a computer
    • Battery powered (2xAA included) needed for +48V phantom only

Package includes

  • iRig Pre HD
  • Lightning to micro-USB cable
  • USB to micro-USB cable
  • 2 x 1.5V AA battery
  • Velcro strip

Dimensions

  • Size: 40mm/1.57″ x 110mm/4,33″ x 34mm/1.34″
  • Weight: 75g/2.65oz (batteries excluded)
  • Cable length: 60cm/23.62″

Downloads

×